两种电机驱动一模一样，电平也是一致的，接口也都接对了。
为什么还是会一闪一闪的重启模块呢？

模块上面引脚连接好电机驱动口后，电机一动一停

car.py
from pyb import Pin, Timer
inverse_left=False  #change it to True to inverse left wheel
inverse_right=False #change it to True to inverse right wheel

ain1 =  Pin('P0', Pin.OUT_PP)
ain2 =  Pin('P1', Pin.OUT_PP)
bin1 =  Pin('P2', Pin.OUT_PP)
bin2 =  Pin('P3', Pin.OUT_PP)
ain1.low()
ain2.low()
bin1.low()
bin2.low()

pwma = Pin('P7')
pwmb = Pin('P8')
tim = Timer(4, freq=1000)
ch1 = tim.channel(1, Timer.PWM, pin=pwma)
ch2 = tim.channel(2, Timer.PWM, pin=pwmb)
ch1.pulse_width_percent(0)
ch2.pulse_width_percent(0)

def run(left_speed, right_speed):
    if inverse_left==True:
        left_speed=(-left_speed)
    if inverse_right==True:
        right_speed=(-right_speed)

    if left_speed < 0:
        ain1.low()
        ain2.high()
    else:
        ain1.high()
        ain2.low()
    ch1.pulse_width_percent(abs(left_speed))

    if right_speed < 0:
        bin1.low()
        bin2.high()
    else:
        bin1.high()
        bin2.low()
    ch2.pulse_width_percent(abs(right_speed))

pid.py
from pyb import millis
from math import pi, isnan

class PID:
_kp = _ki = _kd = _integrator = _imax = 0
_last_error = _last_derivative = _last_t = 0
_RC = 1/(2 * pi * 20)
def init(self, p=0, i=0, d=0, imax=0):
self._kp = float(p)
self._ki = float(i)
self._kd = float(d)
self._imax = abs(imax)
self._last_derivative = float('nan')

def get_pid(self, error, scaler):
    tnow = millis()
    dt = tnow - self._last_t
    output = 0
    if self._last_t == 0 or dt > 1000:
        dt = 0
        self.reset_I()
    self._last_t = tnow
    delta_time = float(dt) / float(1000)
    output += error * self._kp
    if abs(self._kd) > 0 and dt > 0:
        if isnan(self._last_derivative):
            derivative = 0
            self._last_derivative = 0
        else:
            derivative = (error - self._last_error) / delta_time
        derivative = self._last_derivative + \
                                 ((delta_time / (self._RC + delta_time)) * \
                                    (derivative - self._last_derivative))
        self._last_error = error
        self._last_derivative = derivative
        output += self._kd * derivative
    output *= scaler
    if abs(self._ki) > 0 and dt > 0:
        self._integrator += (error * self._ki) * scaler * delta_time
        if self._integrator < -self._imax: self._integrator = -self._imax
        elif self._integrator > self._imax: self._integrator = self._imax
        output += self._integrator
    return output
def reset_I(self):
    self._integrator = 0
    self._last_derivative = float('nan')

'''

Blob Detection Example

This example shows off how to use the find_blobs function to find color

blobs in the image. This example in particular looks for dark green objects.

import sensor, image, time
import car
from pid import PID

You may need to tweak the above settings for tracking green things...

Select an area in the Framebuffer to copy the color settings.

sensor.reset() # Initialize the camera sensor.
sensor.set_pixformat(sensor.RGB565) # use RGB565.
sensor.set_framesize(sensor.QQVGA) # use QQVGA for speed.
sensor.skip_frames(10) # Let new settings take affect.
sensor.set_auto_whitebal(False) # turn this off.
clock = time.clock() # Tracks FPS.

For color tracking to work really well you should ideally be in a very, very,

very, controlled enviroment where the lighting is constant...

green_threshold = (76, 96, -110, -30, 8, 66)
size_threshold = 2000
x_pid = PID(p=0.5, i=1, imax=100)
h_pid = PID(p=0.05, i=0.1, imax=50)

def find_max(blobs):
max_size=0
for blob in blobs:
if blob[2]*blob[3] > max_size:
max_blob=blob
max_size = blob[2]*blob[3]
return max_blob

while(True):
clock.tick() # Track elapsed milliseconds between snapshots().
img = sensor.snapshot() # Take a picture and return the image.

blobs = img.find_blobs([green_threshold])
if blobs:
    max_blob = find_max(blobs)
    x_error = max_blob[5]-img.width()/2
    h_error = max_blob[2]*max_blob[3]-size_threshold
    print("x error: ", x_error)
    '''
    for b in blobs:
        # Draw a rect around the blob.
        img.draw_rectangle(b[0:4]) # rect
        img.draw_cross(b[5], b[6]) # cx, cy
    '''
    img.draw_rectangle(max_blob[0:4]) # rect
    img.draw_cross(max_blob[5], max_blob[6]) # cx, cy
    x_output=x_pid.get_pid(x_error,1)
    h_output=h_pid.get_pid(h_error,1)
    print("h_output",h_output)
    car.run(-h_output-x_output,-h_output+x_output)
else:
    car.run(10,-10)