• 免费好用的星瞳AI云服务上线!简单标注,云端训练,支持OpenMV H7和OpenMV H7 Plus。可以替代edge impulse。 https://forum.singtown.com/topic/9519
  • 我们只解决官方正版的OpenMV的问题(STM32),其他的分支有很多兼容问题,我们无法解决。
  • 如果有产品硬件故障问题,比如无法开机,论坛很难解决。可以直接找售后维修
  • 发帖子之前,请确认看过所有的视频教程,https://singtown.com/learn/ 和所有的上手教程http://book.openmv.cc/
  • 每一个新的提问,单独发一个新帖子
  • 帖子需要目的,你要做什么?
  • 如果涉及代码,需要报错提示全部代码文本,请注意不要贴代码图片
  • 必看:玩转星瞳论坛了解一下图片上传,代码格式等问题。
  • 识别A4纸上一串数字,固定摄像头和A4纸距离,有个别数字难识别。



    • 代码如下,A4纸上有一串数字,现在需要识别出来数字,固定摄像头和A4纸的距离时,总是有个别数字很难识别出来。这时候如果把距离增大或者减小,移动的过程中就能识别出来。但是加一个移动机构有点复杂,有没有固定状态下快速识别的好方法。
      import time, sensor, image
      from image import SEARCH_EX, SEARCH_DS
      from pyb import UART

      #从imgae模块引入SEARCH_EX和SEARCH_DS。使用from import仅仅引入SEARCH_EX,
      #SEARCH_DS两个需要的部分,而不把image模块全部引入。

      Reset sensor

      sensor.reset()

      Set sensor settings

      sensor.set_contrast(1)
      sensor.set_gainceiling(16)

      Max resolution for template matching with SEARCH_EX is QQVGA

      sensor.set_framesize(sensor.QVGA)

      You can set windowing to reduce the search image.

      #sensor.set_windowing(((640-80)//2, (480-60)//2, 80, 60))
      sensor.set_pixformat(sensor.GRAYSCALE)

      Load template.

      Template should be a small (eg. 32x32 pixels) grayscale image.

      templates = ["/N.pgm","/0.pgm","/1.pgm","/2.pgm","/3.pgm","/4.pgm","/5.pgm"]

      clock = time.clock()
      uart1 = UART(1, 115200,timeout_char=1000)
      uart1.init(115200, bits=8, parity=None, stop=1, timeout_char=1000) # 使用给定参数初始化

      Run template matching

      while (True):
      clock.tick()
      img = sensor.snapshot()

      # find_template(template, threshold, [roi, step, search])
      # ROI: The region of interest tuple (x, y, w, h).
      # Step: The loop step used (y+=step, x+=step) use a bigger step to make it faster.
      # Search is either image.SEARCH_EX for exhaustive search or image.SEARCH_DS for diamond search
      #
      # Note1: ROI has to be smaller than the image and bigger than the template.
      # Note2: In diamond search, step and ROI are both ignored.
      for t in templates:
          template = image.Image(t)
          #对每个模板遍历进行模板匹配
          r = img.find_template(template, 0.65, step=2, search=SEARCH_EX)#, roi=(40, 100, 240, 60))
      #find_template(template, threshold, [roi, step, search]),threshold中
      #的0.7是相似度阈值,roi是进行匹配的区域(左上顶点为(10,0),长80宽60的矩形),
      #注意roi的大小要比模板图片大,比frambuffer小。
      #把匹配到的图像标记出来
          if r:
      
              img.draw_rectangle(r)
              print(t) #打印模板名字
      
              #print(r.cx(),r.cy())
      
              img.draw_rectangle(r)
              x = r[0]
              y = r[1]
              w = r[2]
              h = r[3]
      
              print(x,y,w,h) #打印获取到的坐标和大小
      
              uart1.write(t)
      
      #print(clock.fps())
      

      0_1675043496261_e3bcdf4696087be547c4d1ae4c9eccd9.png



    • find_template 函数里,0.65改小一点试试。