• 免费好用的星瞳AI云服务上线!简单标注,云端训练,支持OpenMV H7和OpenMV H7 Plus。可以替代edge impulse。 https://forum.singtown.com/topic/9519
  • 我们只解决官方正版的OpenMV的问题(STM32),其他的分支有很多兼容问题,我们无法解决。
  • 如果有产品硬件故障问题,比如无法开机,论坛很难解决。可以直接找售后维修
  • 发帖子之前,请确认看过所有的视频教程,https://singtown.com/learn/ 和所有的上手教程http://book.openmv.cc/
  • 每一个新的提问,单独发一个新帖子
  • 帖子需要目的,你要做什么?
  • 如果涉及代码,需要报错提示全部代码文本,请注意不要贴代码图片
  • 必看:玩转星瞳论坛了解一下图片上传,代码格式等问题。
  • 官方提供的WIFI例程,while循环的意义是什么呀?


    • Banned

      🤣

      import sensor, image, time, network, usocket, sys
      
      SSID ='OPENMV_AP'    # Network SSID
      KEY  ='1234567890'    # Network key (must be 10 chars)
      HOST = ''           # Use first available interface
      PORT = 8080         # Arbitrary non-privileged port
      
      # Reset sensor
      sensor.reset()
      # Set sensor settings
      sensor.set_contrast(1)
      sensor.set_brightness(1)
      sensor.set_saturation(1)
      sensor.set_gainceiling(16)
      sensor.set_framesize(sensor.QQVGA)
      sensor.set_pixformat(sensor.GRAYSCALE)
      
      # Init wlan module in AP mode.
      wlan = network.WINC(mode=network.WINC.MODE_AP)
      wlan.start_ap(SSID, key=KEY, security=wlan.WEP, channel=2)
      
      # You can block waiting for client to connect
      #print(wlan.wait_for_sta(10000))
      
      def response(s):
          print ('Waiting for connections..')
          client, addr = s.accept()
          # set client socket timeout to 2s
          client.settimeout(2.0)
          print ('Connected to ' + addr[0] + ':' + str(addr[1]))
      
          # Read request from client
          data = client.recv(1024)
          # Should parse client request here
      
          # Send multipart header
          client.send("HTTP/1.1 200 OK\r\n" \
                      "Server: OpenMV\r\n" \
                      "Content-Type: image/jpeg\r\n\r\n")
      
          # FPS clock
          clock = time.clock()
      
          # Start streaming images
          # NOTE: Disable IDE preview to increase streaming FPS.
      
      
          frame = sensor.snapshot()
          cframe = frame.compressed(quality=35)
          client.send(cframe)
          client.close()
      
      while (True):
          # Create server socket
          s = usocket.socket(usocket.AF_INET, usocket.SOCK_STREAM)
          try:
              # Bind and listen
              s.bind([HOST, PORT])
              s.listen(5)
      
              # Set server socket timeout
              # NOTE: Due to a WINC FW bug, the server socket must be closed and reopened if
              # the client disconnects. Use a timeout here to close and re-create the socket.
              s.settimeout(3)
              response(s)
          except OSError as e:
              s.close()
              print("socket error: ", e)
              #sys.print_exception(e)
      
      


    • 就是死循环啊。一直新建socket,如果有人接入,就返回数据,如果没人接入就关闭socket。