实例WIFI-scan的时候出现了WINC模块不能用的情况![

[6iyh]

连接连接wifi模块,使用实例WIFI-scan的时候出现了WINC模块不能用的情况

[x3cb]

@6iyh 我这也是啊，按照视频教程做的

[kidswong999]

This post is deleted!

[yuan]

1. 首先将OpenMV ide安装目录下的wifi固件winc_19_6_1.bin保存到OpenMV弹出来的U盘里（wifi固件路径： openmv-ide-install-dir>/share/qtcreator/firmware/WINC1500/winc_19_6_1.bin ）

2.重新上电OpenMV

3.运行例程 14-WiFi-Shield->fw_update WINC
更新wifi固件

# WINC Firmware Update Script.
#
# This script updates the ATWINC1500 WiFi module firmware.
# 1) Copy the firmware image to a FAT32/exFAT SD card.
# 2) Safe remove/eject the SD card (or umount on Linux).
# 3) Reset the camera from the IDE.
# 4) Run this script to update the firmware.
#
# NOTE: Older fimware versions are no longer supported by the host driver.
# NOTE: The latest firmware (19.6.1) only works on ATWINC1500-MR210PB.
# NOTE: Firmware is at <openmv-ide-install-dir>/share/qtcreator/firmware/WINC1500/winc_19_6_1.bin

import network

# Init wlan module in Download mode.
wlan = network.WINC(mode=network.WINC.MODE_FIRMWARE)

# For ATWINC1500-MR210PB only.
wlan.fw_update("/winc_19_6_1.bin")

[6iyh]

@yuan 这个文件都比弹出来这个U盘还大,根本放不进去

[nqow_1586691935]

@6iyh 对啊，应该怎么办？

[kidswong999]

需要插入SD卡。