新手颜色识别

mbq1

# Single Color RGB565 Blob Tracking Example
#
# This example shows off single color RGB565 tracking using the OpenMV Cam.

import sensor, pyb,image, time

import time
from pyb import LED

red_led   = LED(1)
green_led = LED(2)
blue_led  = LED(3)
ir_led    = LED(4)


threshold_index = 0 # 0 for red, 1 for green, 2 for blue

# Color Tracking Thresholds (L Min, L Max, A Min, A Max, B Min, B Max)
# The below thresholds track in general red/green/blue things. You may wish to tune them...
thresholds = [(30, 100, 15, 127, 15, 127), # generic_red_thresholds
              (30, 100, -64, -8, -32, 32), # generic_green_thresholds
              (0, 30, 0, 64, -128, 0)] # generic_blue_thresholds

sensor.reset()
sensor.set_pixformat(sensor.RGB565)
sensor.set_framesize(sensor.QVGA)
sensor.skip_frames(time = 2000)
sensor.set_auto_gain(False) # must be turned off for color tracking
sensor.set_auto_whitebal(False) # must be turned off for color tracking
clock = time.clock()

# Only blobs that with more pixels than "pixel_threshold" and more area than "area_threshold" are
# returned by "find_blobs" below. Change "pixels_threshold" and "area_threshold" if you change the
# camera resolution. "merge=True" merges all overlapping blobs in the image.

while(True):
    clock.tick()    
    img = sensor.snapshot()   
    for blob in img.find_blobs([thresholds[threshold_index]], pixels_threshold=100, area_threshold=200, merge=True):
        img.draw_rectangle(blob.rect())
        img.draw_cross(blob.cx(), blob.cy())
        print(clock.fps())

识别到红色后绿灯亮，没有识别到红色红灯亮，新手python不会啊

kidswong999

if blobs:
    绿灯.亮()
else:
    绿灯.灭()

mbq1

我只要是不知道这个if 语句往哪里加啊？麻烦您指教

kidswong999

建议你先看看python的语法，比如对象什么的。

新手 颜色识别

新手颜色识别