4. 代码没有报错，也全部导入到openmv了，用电笔测量PWM没有电平，对应电机不旋转。
  • OpenMV VSCode 扩展发布了，在插件市场直接搜索OpenMV就可以安装
  • 如果有产品硬件故障问题，比如无法开机，论坛很难解决。可以直接找售后维修。
  • 发帖子之前，请确认看过所有的视频教程，https://singtown.com/learn/ 和所有的上手教程http://book.openmv.cc/
  • 每一个新的提问，单独发一个新帖子
  • 帖子需要目的，你要做什么？
  • 如果涉及代码，需要报错提示与全部代码文本，请注意不要贴代码图片
  • 必看：玩转星瞳论坛了解一下图片上传，代码格式等问题。

    • 代码没有报错，也全部导入到openmv了，用电笔测量PWM没有电平，对应电机不旋转。

    • Q
       

      import time
from servo import Servos
from machine import SoftI2C, Pin

i2c = SoftI2C(sda=Pin('P5'), scl=Pin('P4'))
servo = Servos(i2c, address=0x40, freq=50, min_us=500, max_us=2500, degrees=180)

while True:

        servo.position(8, 180)


      

import utime
import ustruct

class PCA9685:
    def __init__(self, i2c, address=0x40):
        self.i2c = i2c
        self.address = address
        self.reset()

    def _write(self, address, value):
        self.i2c.writeto_mem(self.address, address, bytearray([value]))

    def _read(self, address):
        return self.i2c.readfrom_mem(self.address, address, 1)[0]

    def reset(self):
        self._write(0x00, 0x00) # Mode1

    def freq(self, freq=None):
        if freq is None:
            return int(25000000.0 / 4096 / (self._read(0xfe) - 0.5))
        prescale = int(25000000.0 / 4096.0 / freq + 0.5)
        old_mode = self._read(0x00) # Mode 1
        self._write(0x00, (old_mode & 0x7F) | 0x10) # Mode 1, sleep
        self._write(0xfe, prescale) # Prescale
        self._write(0x00, old_mode) # Mode 1
        utime.sleep_us(5)
        self._write(0x00, old_mode | 0xa1) # Mode 1, autoincrement on

    def pwm(self, index, on=None, off=None):
        if on is None or off is None:
            data = self.i2c.readfrom_mem(self.address, 0x06 + 4 * index, 4)
            return ustruct.unpack('<HH', data)
        data = ustruct.pack('<HH', on, off)
        self.i2c.writeto_mem(self.address, 0x06 + 4 * index,  data)

    def duty(self, index, value=None, invert=False):
        if value is None:
            pwm = self.pwm(index)
            if pwm == (0, 4096):
                value = 0
            elif pwm == (4096, 0):
                value = 4095
            value = pwm[1]
            if invert:
                value = 4095 - value
            return value
        if not 0 <= value <= 4095:
            raise ValueError("Out of range")
        if invert:
            value = 4095 - value
        if value == 0:
            self.pwm(index, 0, 4096)
        elif value == 4095:
            self.pwm(index, 4096, 0)
        else:
            self.pwm(index, 0, value)


      
import pca9685
import math

class Servos:
    def __init__(self, i2c, address=0x40, freq=50, min_us=600, max_us=2400, degrees=180):
        self.period = 1000000 / freq
        self.min_duty = self._us2duty(min_us)
        self.max_duty = self._us2duty(max_us)
        self.degrees = degrees
        self.freq = freq
        self.pca9685 = pca9685.PCA9685(i2c, address)
        self.pca9685.freq(freq)

    def _us2duty(self, value):
        return int(4095 * value / self.period)

    def position(self, index, degrees=None, radians=None, us=None, duty=None):
        span = self.max_duty - self.min_duty
        if degrees is not None:
            duty = self.min_duty + span * degrees / self.degrees
        elif radians is not None:
            duty = self.min_duty + span * radians / math.radians(self.degrees)
        elif us is not None:
            duty = self._us2duty(us)
        elif duty is not None:
            pass
        else:
            return self.pca9685.duty(index)
        duty = min(self.max_duty, max(self.min_duty, int(duty)))
        self.pca9685.duty(index, duty)

    def release(self, index):
        self.pca9685.duty(index, 0)

      0_1727317721675_e51b1658b1e27bae9951bd8fbd85e13.jpg

      0

    • 你需要在VIN接5V电池。另外，

      servo.position(8, 180)改为servo.position(7, 180)

      0