为什么我的openmv的lcd和uart一起打开lcd不会显示
求各位大佬指点迷津
OPENMV4 H7 PLUS使用LCD历程LCD屏幕无法正常显示画面
# LCD Example
#
# Note: To run this example you will need a LCD Shield for your OpenMV Cam.
#
# The LCD Shield allows you to view your OpenMV Cam's frame buffer on the go.
import sensor, image, lcd
sensor.reset() # Initialize the camera sensor.
sensor.set_pixformat(sensor.RGB565) # or sensor.GRAYSCALE
sensor.set_framesize(sensor.QQVGA2) # Special 128x160 framesize for LCD Shield.
lcd.init() # Initialize the lcd screen.
while(True):
lcd.display(sensor.snapshot()) # Take a picture and display the image.
openmv的LCD显示问题
老师,请问,openmv为什么LCD只显示图像,显示不了人脸识别标记框和识别眼睛的十字标记
lcd.init()是lcd初始化吗?
init是属于函数还是什么 如果是函数怎么找他怎么定义的?
openmv控制lcd屏显示
openmv用来控制lcd屏显示的rx和tx是哪几个端口
LCD和三个舵机能同时使用吗?一边让舵机动一边看LCD
舵机控制例子
这个例子展示了如何使用OpenMV来控制舵机
import sensor, image, time
from pyb import Servo
import lcd
sensor.reset()
sensor.set_pixformat(sensor.RGB565)
sensor.set_framesize(sensor.QVGA)
sensor.skip_frames(time = 2000)
lcd.init()
s1 = Servo(1) # P7
s3 = Servo(3) # P9
lcd.init()
clock = time.clock()
while(True):
img=sensor.snapshot()
lcd.display(sensor.snapshot())
for i in range(1000):
img=sensor.snapshot()
s1.pulse_width(1000 + i)
s3.pulse_width(1000 + i)
time.sleep_ms(10)
for i in range(1000):
img=sensor.snapshot()
s1.pulse_width(1999 - i)
s3.pulse_width(1999 - i)
time.sleep_ms(10)
求一份LCD文档说明
在官网上没有找到LCD文档说明,特别是LCD的引脚说明,求一份LCD的引脚说明文档,谢谢!
外接电源,LCD是白屏
用外接的电源直接供电LCD,发现始终是白屏,我只接了VIN和GND,并且,用稳压电压5v供电,但是始终白屏。并且白屏之后,换成USB供电之后,还会白屏一段时间,跑LCD例程都是白屏。然后隔一段时间又不知道怎么好了。
我想知道,是不是外接电源给摄像头和LCD供电的时候要注意什么?还有就是白屏了之后,不是跑什么程序都是白屏吗?我想知道怎么快速的恢复过来
openmv的lcd显示屏问题
openmv的LCD显示屏可以只显示图片不显示图片吗
只在LCD上显示数字或者是字母,不显示画面
LCD显示屏显示条纹
lcd显示条纹但是Frame,Buffer里面正常