• 免费好用的星瞳AI云服务上线!简单标注,云端训练,支持OpenMV H7和OpenMV H7 Plus。可以替代edge impulse。 https://forum.singtown.com/topic/9519
  • 我们只解决官方正版的OpenMV的问题(STM32),其他的分支有很多兼容问题,我们无法解决。
  • 如果有产品硬件故障问题,比如无法开机,论坛很难解决。可以直接找售后维修
  • 发帖子之前,请确认看过所有的视频教程,https://singtown.com/learn/ 和所有的上手教程http://book.openmv.cc/
  • 每一个新的提问,单独发一个新帖子
  • 帖子需要目的,你要做什么?
  • 如果涉及代码,需要报错提示全部代码文本,请注意不要贴代码图片
  • 必看:玩转星瞳论坛了解一下图片上传,代码格式等问题。
  • 关于AprilTag标记识别距离的问题



    • 使用标配2.8mm镜头,最大识别距离为45.5cm,再远就识别不出tag了,tag大小对比如下图:
      0_1542176581820_webwxgetmsgimg.jpg
      代码采用官网提供的例子,具体如下:

      # AprilTags Example
      #
      # This example shows the power of the OpenMV Cam to detect April Tags
      # on the OpenMV Cam M7. The M4 versions cannot detect April Tags.
      
      import sensor, image, time, math
      
      sensor.reset()
      sensor.set_pixformat(sensor.RGB565)
      sensor.set_framesize(sensor.QQVGA) # we run out of memory if the resolution is much bigger...
      sensor.skip_frames(30)
      sensor.set_auto_gain(False)  # must turn this off to prevent image washout...
      sensor.set_auto_whitebal(False)  # must turn this off to prevent image washout...
      clock = time.clock()
      
      # 注意!与find_qrcodes不同,find_apriltags 不需要软件矫正畸变就可以工作。
      
      # 注意,输出的姿态的单位是弧度,可以转换成角度,但是位置的单位是和你的大小有关,需要等比例换算
      
      # f_x 是x的像素为单位的焦距。对于标准的OpenMV,应该等于2.8/3.984*656,这个值是用毫米为单位的焦距除以x方向的感光元件的长度,乘以x方向的感光元件的像素(OV7725)
      # f_y 是y的像素为单位的焦距。对于标准的OpenMV,应该等于2.8/2.952*488,这个值是用毫米为单位的焦距除以y方向的感光元件的长度,乘以y方向的感光元件的像素(OV7725)
      
      # c_x 是图像的x中心位置
      # c_y 是图像的y中心位置
      
      f_x = (2.8 / 3.984) * 160 # 默认值
      f_y = (2.8 / 2.952) * 120 # 默认值
      c_x = 160 * 0.5 # 默认值(image.w * 0.5)
      c_y = 120 * 0.5 # 默认值(image.h * 0.5)
      
      def degrees(radians):
          return (180 * radians) / math.pi
      
      while(True):
          clock.tick()
          img = sensor.snapshot()
          for tag in img.find_apriltags(fx=f_x, fy=f_y, cx=c_x, cy=c_y): # 默认为TAG36H11
              img.draw_rectangle(tag.rect(), color = (255, 0, 0))
              img.draw_cross(tag.cx(), tag.cy(), color = (0, 255, 0))
              print_args = (tag.x_translation(), tag.y_translation(), tag.z_translation(), \
                  degrees(tag.x_rotation()), degrees(tag.y_rotation()), degrees(tag.z_rotation()))
              # 位置的单位是未知的,旋转的单位是角度
              print("Tx: %f, Ty %f, Tz %f, Rx %f, Ry %f, Rz %f" % print_args)
          print(clock.fps())
      

      请问如何获得更远的识别距离





    • @kidswong999 十分有效,非常感谢



    • 请问你找到解决方案了吗?能否说一下?