Snapshot Example

Note: You will need an SD card to run this example.

You can use your OpenMV Cam to save image files.

import sensor, image, pyb

RED_LED_PIN = 1
BLUE_LED_PIN = 3

sensor.reset() # Initialize the camera sensor.
sensor.set_pixformat(sensor.GRAYSCALE) # or sensor.GRAYSCALE
sensor.set_framesize(sensor.B128X128) # or sensor.QQVGA (or others)
sensor.set_windowing((92,112))
sensor.skip_frames(10) # Let new settings take affect.
sensor.skip_frames(time = 2000)

num = 1 #设置被拍摄者序号，第一个人的图片保存到s1文件夹，第二个人的图片保存到s2文件夹，以此类推。每次更换拍摄者时，修改num值。

n = 20 #设置每个人拍摄图片数量。

#连续拍摄n张照片，每间隔3s拍摄一次。
while(n):
#红灯亮
pyb.LED(RED_LED_PIN).on()
sensor.skip_frames(time = 500) # Give the user time to get ready.等待3s，准备一下表情。

#红灯灭，蓝灯亮
pyb.LED(RED_LED_PIN).off()
pyb.LED(BLUE_LED_PIN).on()

#保存截取到的图片到SD卡
print(n)
img=sensor.snapshot()
lbp=img.find_lbp((0, 0, img.width(), img.height()))
#image.save_descriptor(lbp, "cs/c%s/%s.orb" % (num, n))
image.save_descriptor(lbp,"face/s%s/%s.orb" % (num, n))
n -= 1
pyb.LED(BLUE_LED_PIN).off()
print("Done! Reset the camera to see the saved image.")

用示例改的程序，拍摄完文件夹没有东西