import sensor, image, time, network, usocket, sys

SSID ='OPENMV_AP'    # Network SSID
KEY  ='1234567890'    # Network key (must be 10 chars)
HOST = ''           # Use first available interface
PORT = 8080         # Arbitrary non-privileged port

# Reset sensor
sensor.reset()
# Set sensor settings

sensor.set_framesize(sensor.QQVGA)
sensor.set_pixformat(sensor.RGB565)

# Init wlan module in AP mode.
wlan = network.WLAN(network.AP_IF)
wlan.config(ssid=SSID, key=KEY, channel=2)
wlan.active(True)

# You can block waiting for client to connect
#print(wlan.wait_for_sta(10000))

def response(s):
    print ('Waiting for connections..')
    client, addr = s.accept()
    # set client socket timeout to 2s
    client.settimeout(2.0)
    print ('Connected to ' + addr[0] + ':' + str(addr[1]))

    # Read request from client
    data = client.recv(1024)
    # Should parse client request here

    # Send multipart header
    client.send("HTTP/1.1 200 OK\r\n" \
                "Server: OpenMV\r\n" \
                "Content-Type: image/jpeg\r\n\r\n")

    # FPS clock
    clock = time.clock()

    # Start streaming images
    # NOTE: Disable IDE preview to increase streaming FPS.


    frame = sensor.snapshot()
    cframe = frame.compressed(quality=35)
    client.send(cframe)
    client.close()

while (True):
    # Create server socket
    s = usocket.socket(usocket.AF_INET, usocket.SOCK_STREAM)
    sensor.snapshot()
    img.save("%s.jpg"%tim)
    try:
        # Bind and listen
        s.bind([HOST, PORT])
        s.listen(5)

        # Set server socket timeout
        # NOTE: Due to a WINC FW bug, the server socket must be closed and reopened if
        # the client disconnects. Use a timeout here to close and re-create the socket.
        s.settimeout(3)
        response(s)
    except OSError as e:
        s.close()
        print("socket error: ", e)
        #sys.print_exception(e)
![0_1718268280063_1.png](https://fcdn.singtown.com/e0b06a29-548c-49f6-b6df-545dc031597c.png) 

为什么直接使用上手教程中的“14-WiFi-Shield->mjpeg_streamer_ap 热点”程序，运行时候有错，显示image没有“compressed”

我想请问，怎么将openmv里面的图片通过串口传输到STM32上。因为最后是想实现在单片机上查看拍到的图片？

@kidswong999请问， 如果要传输的话，怎么传输。速度大概多久一张